Web App: Edit a mote


Component: refers to a physical part of a water system that is being monitored by the meter.me system (e.g., tank, well, water meter)

Mote: refers to a communication device that collects information from a monitored component and sends that information to the meter.me server.


Please ensure your user is set up with an “Installer” Role on the applicable water system. An “installer” role is required to add, edit, swap, or remove motes or components on a meter.me system. Another user with an “Owner” or “Installer” Role on the system can add you as an “Installer” Role if needed.

How to edit a mote

  1. Log in to the meter.me web app: web.meter.me (note: this action is not available on the mobile app)
  2. Select the system with the mote you want to edit
  3. Under Devices, select Motes
  4. Find the mote in the list
  5. Select the three dots on the right-hand side of that mote
  6. Select Edit
  7. Make the changes you’d like
  8. Note that only the Name and uplink interval can be edited

Select Save & Close

That’s it! The changes you made will be saved. If you want to swap a mote, please refer to our article Web App: Swap a mote.